Are you worried because your MacBook charger has bent and not charging properly? If yes, don’t worry!
This article will investigate the most common causes of bent MacBook chargers and offer practical solutions. Say goodbye to power outages and learn how to return your charger to its original shape. Let’s get started on the way to a more consistent charging experience!
Causes of a Bent Charger
A bent charger might be inconvenient, but understanding its causes can help avoid future mistakes. Accidental mishandling is a common cause, in which users mistakenly place heavy things on the charger or pull it forcefully.
Incorrect winding and storing might also cause frequent bending at severe angles. Excessive heat exposure or extensive use might weaken the charger’s construction and cause it to bend.
Poor quality or third-party chargers may not last as long as official ones. Furthermore, manufacturing flaws or using the charger as a makeshift hold can result in bending.
Keeping these causes in mind might help to safeguard your charger and maintain a smooth charging experience.
Is It Safe to Use a Bent MacBook Charger?
Using a bent MacBook charger is not recommended and may be hazardous. A bent charger may have compromised internal wires, insulation, or other components, raising the danger of electrical risks, overheating, and even fire.
Furthermore, the twisted design can strain your MacBook’s charging connector, perhaps causing damage to the device itself.
A bent charger must be replaced with a new one from a reliable source or straight from the manufacturer. Using a fully functional and undamaged charger ensures the safety of your MacBook and eliminates any potential concerns linked to a bent charger.
How Do You Fix a Bent MacBook Charger?
Here is how you can fix your bent charger at home if you can’t afford the new one.
1. Unplug and Inspect
To begin, unplug the charger from both the MacBook and the power socket. Examine the charger’s whole length for any obvious bends or kinks.
Examine the cables for broken or exposed wires, which could indicate interior damage. If the bent is minimal and hasn’t caused any major damage, you might be able to repair it yourself.
2. Straighten the Bend Gradually
Using a delicate, steady grip, gradually straighten the bent area of the charger. Too much force should be avoided as it could increase the harm.
Work your way around the bend gradually, applying gentle pressure until the charger is as straight as possible. Keep in mind not to overbend in the other direction.
3. Heat and Mold Technique
For more resistant bends, soften the plastic coating using a regulated heat source like a hairdryer. Then, delicately mold the charger back to its original shape using your hands.
Applying too much heat or force could result in additional harm. Allow the charger to cool before re-plugging it in.
4. Use a Pen/Pencil Tube
If the bend of the charger is near the connector end, you can fit the bent portion inside a pen or pencil tube. Apply gentle pressure on the charger to bend it in the opposite way.
This procedure aids in the restoration of a small bent, although excessive pressure may result in breaking.
5. Consider Expert Repair or Replacement
If the bent is significant or you’re unsure about repairing it yourself, you should seek expert help or replace the charger entirely. A competent technician can safely analyze the charger’s condition and offer a repair or replacement.
Remember, it’s critical to keep your charger in good functioning order to avoid any electrical risks or harm to your MacBook. Always use genuine chargers and handle them carefully to lengthen their lifespan and ensure their safety while in use.
Prevent Bending of MacBook Charger
It is important to take precautions to avoid bending your charger. Here are some important preventions you should consider.
1. Store Properly
Avoid coiling or wrapping the charger around your MacBook recklessly. To avoid stress on the wire and connector, use the manufacturer’s recommended method of loosely wrapping the cable. Use cable management accessories to keep the charger organized while in storage.
2. Buy Cable Shields
Buy cable shields or sleeves made exclusively for MacBook chargers. These accessories provide additional protection to sensitive regions such as connector and cable joints, minimizing the risk of bending and fraying.
3. Handle with Care
Be delicate and gentle with your MacBook charger. Pulling the wire from the laptop or power outlet might strain the connector and cause it to bend over time. When unplugging the charger, always hold it by the connector.
4. Secure the Connection
When charging your MacBook, make sure the connection is firmly put into the laptop’s charging port. A faulty connection can cause the charger to flex as it hangs from the laptop.
5. Avoid Overloading
Do not overload the charger by placing heavy things on it or exerting excessive force on the wire while it is attached to the laptop or the power outlet. Stress reduction on the charger helps to maintain structural integrity and prevents bending.
Conclusion
In conclusion, a bent MacBook charger can endanger your device’s safety and functionality. Chargers should be cautiously handled and stored according to the manufacturer’s instructions.
If you meet a bend, use gentle fixes rather than force. For long-lasting charger performance, prioritize prevention through proper handling and the use of protective accessories.