iPhone Charging Port Not Working? Here’s How To Fix It!

If your iPhone’s charging is not charging your phone, it can be a frustrating experience. This is a common problem that many people experience with their iPhones.

There are a few things you can try and fix the problem, but sometimes you may need to take your phone to a professional for repairs.

This article will go over some of the most common reasons why an iPhone’s charging port might not be working properly and how to fix them. Also, we will give some tips on how to prevent your charging port from becoming damaged in the future.

So if your iPhone isn’t charging the way it used to, keep reading for some helpful advice!

Try cleaning your charging port.

One of the most common reasons an iPhone charging port is not working properly is because it is clogged with dust or lint. Over time, these small particles can build up and cause problems with the way your charging port connects to your iPhone.

To clean out your charging port, you will need a small, soft-bristled brush or simply use a toothpick. Gently insert the brush into the charging port and move it around to dislodge any debris that may be stuck in there.

Once you have removed all of the visible dirt and lint, blow into the charging port to remove any remaining particles. Then, try plugging in your charging cable, and your iPhone will surely start charging again.

Check for water damage.

Another common reason an iPhone charging port is not working is that your iPhone has been damaged by water. If your iPhone has been water damaged, it is important to check the charging port for any signs of corrosion.

To do this, simply look at the port with a magnifying glass and see if you can spot any white, fuzzy spots. If you do see signs of corrosion, you will need to clean it out as soon as possible.

The best way to do this is to use a cotton swab dipped in isopropyl alcohol. Gently rub the cotton swab around the affected areas until the corrosion is gone.

Check your charging cable for damage.

Another reason an iPhone charging port is not working properly is that the charging cable is damaged. Over time, the connectors on your charging cable can become bent or frayed, which can cause problems with the connection.

To fix this, simply inspect your charging cable for any damage. If you see any damage, gently bend the connectors back into place or replace the cable entirely.

Use an MFI certified charging cable.

If you’re using an unsupported accessory, like a non-MFi certified cable or wireless charger, it could be the reason your iPhone isn’t charging. MFi is Apple’s certification program for developers of hardware and software that work with Apple products.

To put it simply, only accessories that have been specifically designed to work with the iPhone are MFi certified. So, if you’re using a non-MFi certified accessory, it could be the reason your iPhone isn’t charging. Try using a different, MFi certified accessory and see if that solves the problem.

Try a different charging cable.

If you have tried all of the above tips and your iPhone charging port is still not working, then you may need to try a different charging cable. Sometimes, the problem lies not with the port but with the cable itself.

Therefore, it is always good to have a backup charging cable on hand just in case. You can purchase a new charging cable from your local electronics store or online.

Replace your charging port

If cleaning or repairing your charging port does not fix the problem, then you may need to replace it entirely. This is a relatively simple process that can be done at home with a few tools:

  1. You will need to purchase a new charging port from your local electronics store.
  2. Use a small screwdriver to remove the two screws that hold the old charging port in place. Carefully disconnect the old charging port and then connect the new one.
  3. Screw the new port into place and reassemble your iPhone.

Try Restarting your iPhone.

Sometimes, all you need to do to fix an iPhone charging port that is not working is to restart your device. This can help reset the connection between your charging port and your iPhone, which can sometimes become loose.

To restart your iPhone, simply press and hold the power button until the “Slide to Power Off” option appears. Once your iPhone is off, turn it back on by pressing and holding the power button.

Update your iPhone’s software

If you are still having problems with your iPhone charging port after trying all of the above tips, then you may need to update your iPhone’s software.

New software updates often include fixes for common bugs and issues, so this is always worth trying. To update your iPhone, simply connect it to your computer and open iTunes. Then, click on the “Update” button to install the latest software update.

What if iPhone is showing charging but battery percentage not increasing?

If your iPhone is showing the charging symbol, but the battery percentage is not increasing, then there could be a problem with the battery. It is possible that your battery is old and needs to be replaced.

If that’s the case, you will then need to take your iPhone to an Apple Store or an authorized service provider for repair. Also, if you are not using the original Apple adapter and MFI certified charging cable, your iPhone might not charge.

So, make sure you are using the original Apple adapter and MFI certified cable to charge your iPhone.

iPhone charging port repair cost

The cost of repairing an iPhone charging port can vary depending on the severity of the damage and whether it is a hardware or software issue.

In most cases, repairs will range from $20 to $100 depending on your iPhone model and where you get it repaired. Ifixit is a good resource to use to estimate how much it will cost to repair your specific iPhone model.

If your iPhone is under warranty, you may be able to get the repairs covered by Apple.

Contact Apple Support

If neither of these solutions solves your problem, it is possible that the problem lies with your iPhone itself.

If your iPhone is still not charging properly after you have cleaned out the charging port and checked for damage, you may need to take it to a professional for further diagnosis.

Apple’s customer support team can help troubleshoot the problem and determine if it is a hardware or software issue.

They may also be able to offer you a warranty replacement if your iPhone is still under warranty. To contact Apple, simply visit their website or give them a call.

In some cases, a faulty battery or logic board can also cause problems with the way your iPhone charges. These are much more complex repairs that should only be attempted by a trained professional.

How to prevent your charging port from becoming damaged in the future

Now that you know how to fix a charging port that is not working, you may be wondering how you can prevent this problem from happening in the first place.

There are a few things you can do to prolong the life of your iPhone’s charging port and keep it working properly for as long as possible.

  • Try to clean out your charging port at least twice a month with a can of compressed air or a small brush. This will help remove any dust or lint that could build up and cause problems.
  • Please do not use your iPhone while it is charging. This can put stress on the charging port and cause damage over time.
  • Be careful not to bend or damage the charging cable when you are using it. Try to avoid putting stress on the connectors and always unplug it carefully.
  • Be careful when inserting and removing the charging cable. Rough handling can cause damage to the port itself.
  • Do not use third-party charging cables or adapters. These are not as well made as the official Apple ones and can cause damage to your iPhone.
  • If you will be using your iPhone in a dusty or dirty environment, try to cover the charging port with a piece of tape or a small sticker. This will help keep the dirt out.
  • Avoid using cheap charging cables. Over time, these can cause damage to the connectors on your iPhone’s charging port.
  • Do not leave your iPhone in a hot car. Extreme temperatures might harm your iPhone’s internal components, including the charging port.
  • Please do not use your iPhone while it is charging. This can put stress on the charging port and cause damage over time.

By following these simple tips, you can help keep your iPhone’s charging port in good working condition for many years to come.

Conclusion

If your iPhone charging port is not working, there are a few things you can try to fix the problem. First, make sure you are using the original Apple adapter and MFI certified cable.

If this doesn’t work, try cleaning out the charging port with a can of compressed air or a small brush. If these solutions don’t work, you may need to take your iPhone to a professional for further diagnosis.

You can also prevent damage to your iPhone’s charging port by avoiding cheap charging cables and extreme temperatures. Follow these simple tips to keep your iPhone’s charging port in good working condition for many years to come.

Thanks for reading! We hope this article has helped you troubleshoot your iPhone charging problems. If you have any further questions or need assistance with a repair, don’t hesitate to contact us! We would be happy to help.

RELATED ARTICLES:

4 Best Methods To Delete Photo Albums On Your iPhone

A Complete Guide To Renew Wi-Fi Lease On iPhone

8 Methods To Know if Someone’s Phone is Dead

Best Method To Check The Temperature of Your iPhone

How To Unsync Two iPhones: The Ultimate Guide

Leave a Comment